OptiMate Series

Back to the OptiMate Index page

Back to the OM400 Index page

OptiMateŽ OM413
Module with Dark Gray Enclosure

The OM413 Setpoint/Display Panel is a low cost/ high performance man/machine interface with a broad range of operator input and display capabilities. The panel includes six field points which can be used for either setpoint entry or data display.

Setpoints (display points) can be custom labeled by the user with plastic inserts. The inserts can be custom legended with text and/or graphics, and slipped into protective pockets behind the faceplate. Setpoint adjustment can be performed by use of the arrow keys to move the value up or down. The Select key is used to scroll between the six setpoints. An LED to the left of each label insert shows which one is currently active.

The OM413 Setpoint/Display Panel is part of Optimation's OptiMateŽ series. Each OptiMateŽ module is designed to connect to a PLC with a single cable connection. OptiMateŽ 400 series panels can be used individually with a PLC or in a microprocessor system.

When used with a microprocessor system, simple communications over an RS232 communications cable allows the microprocessor to directly read setpoints and update each display point.

When used with a PLC, operation is transparent to the user. Panel functions tie directly into your PLC ladder logic program. The OM413 takes care of the rest.

Features
. 6 independent setpoints or display points with four-digit numeric display
. Pushbutton item selection
. Non-volitile storage of setpoints
. User-Legendable
. Stand-alone capability with direct connection to most PLCs
. RS232 communications
. Mix and match with most other OptiMateŽ modules

Benefits
. Saves valuable I/O rack space
. Eliminates the need for controller I/O modules for operator panel use
. Reduces system integration and retrofit costs
. Remove and replace maintainability
. Rapid future expansion
. Attractive, eye-appealing appearance

Direct Connect to PLCs
OptiMateŽ modules connect and operate directly with most major PLCs. A simple cable connection allows the PLC to control each lamp directly simply by setting bits in data registers. Everything else is totally transparent.

Microprocessor Based Systems
OptiMateŽ modules connect to any computer or microprocessor-based system through a serial link. RS232 communications can be employed. The microprocessor controller simply polls for module data or sends module commands to completely control the operator panels.

Legending the Buttons
Legending the OM413 module involves simply sliding a legend transparency into the pockets in the panel overlay. The bezel can be removed from the front of the module. Once this is done legend transparencies can be placed behind the overlay. A legend transparency can be created by a number of methods. Computer graphics programs combined with overhead transparency paper and a laser printer and/or copier produce excellent results. Other options are listed in the OM413 data sheet.

Configuration
Configuring the OM413 requires the OM-WIN EDIT Configuration Editor, a cable connecting your PC to the module, and a 5VDC power supply with a center negative plug: all sold by Optimation.

Specifications

Physical
. Recessed Mount Housing 6.6"L x 4.0"H x 1.25"D
. Cutout size for above
. 3.55"Hx5.80"L
. Panel Fasteners : Four, 6x32 threaded studs (on ends, symmetrical about center line)
. LED numeric digit height : 0.3 inch
. Housing color : Dark gray

Electrical
. Power (all LEDs on): 5VDC @ 0.80 Watts 160mA @ 5VDC
. Power connector: DC Power plug, center negative

Communications
. RS232
. 4821 to 19200 baud
. Compatible with most major PLC protocols
. Microprocessor-compatible protocol
. 6 pin RJ12 phone jack-type connector

Environmental
. Enclosure - NEMA 4 recessed mount
. Temperature - 0 to 50 C
. Humidity - 95% Non-condensing

Labeling of Lamps and Pushbuttons
. User-defined slide-in labels

OptiMate Model Series: