OptiMate Series

Back to the OptiMate Index page

Back to the OM600 Index page

OptiMateŽ OM609
Module with Dark Gray Enclosure

The OM609 Lamp/Pushbutton Panel provides a flexible and cost-effective alternative to expensive hard-wired indicator lights and pushbuttons. The panel features 6 use- legendable high intensity LED light bars and 9 user legendable pushbuttons. Each of the lamps can be individually controlled to be on, off, or flash. Each of the buttons can be individually configured to operate as either a momentary or alternate-action pushbutton.

Lamps and buttons can be custom labeled by the user with plastic label inserts. The inserts can be custom legended with text and/or graphics, and slipped into a protective pocket behind the faceplate.

The OM609 Lamp/Pushbutton Panel is part of Optimation's OptiMateŽ series. Each OptiMateŽ module is designed to connect to a microprocessor or most PLC's with a single cable connection. OptiMateŽ modules can be used individually, or together with any combination of other OptiMateŽ modules. When used with a microprocessor system, simple communications over either an RS232 or RS422 communications cable allows the microprocessor to directly control each lamp and read the state of each button.

Features
. 6 Plug-In LED Light Bars
. Red, green, or yellow lamps available
. 9 tactile snap pushbuttons
. Independently configurable for momentary or alternate action mode
. User-Legendable
. Stand alone capability with direct connection to most PLCs
. Compatible with any computer via serial communications
. Mix and match with other OptiMateŽ modules

Benefits
. Saves valuable I/O rack space
. Eliminates the need for controller I/O modules for operator panel use
. Reduces system integration and retrofit costs
. Remove and replace maintainability
. Rapid future expansion
. Reduced maintenance costs
. Attractive, eye-appealing appearance
. Direct Connect to PLCs

OptiMateŽ modules connect and operate directly with most major PLCs. A simple cable connection allows the PLC to access each button directly simply by reading bits in data registers. Everything else is totally transparent.

PLC Multi-Modules
The OptiMateŽ series provides the means to construct large custom panels with standard building-block modules. OptiMateŽ modules can be grouped together or separated by up to 4000 feet. Any combination of operator panels can be incorporated into a system.

Microprocessor-Based Systems
OptiMateŽ modules connect to any computer or microprocessor-based system through a serial link. Either RS232 or RS422 communications can be employed. The microprocessor controller simply polls for module data or sends module commands to completely control the operator panels.

Legending the Buttons
Legending the OM609 module involves simply sliding legend transparencies into two pockets in the module overlay. The bezel can be removed from the front of the module. Once this is done, legend transparencies can be placed in the pockets in the overlay (behind the lexan surface layer).

A legend transparency can be created by a number of methods. Computer graphics programs combined with overhead transparency paper and a laser printer and/or copier produce excellent results. Other options are listed in the OM609 data sheet.

Specifications

Physical
. Recessed Mount Housing 6.6"L x 4.0"H x 1.25"D
. Cutout size for above 3.55"Hx5.8"L
. Panel Fasteners : Four, 6x32 threaded studs, (on ends, symmetrical about     center line)
. Weight : 10 ounces
. Color : Dark Gray with black panel
. Button dimensions : .65" square on .75" centers
. Button life : 1,000,000 switch cycles
. Lamp colors available : Red, Green, Yellow (Standard unit contains all red       lamps. Lamps are socketed and can be individually replaced with any color       listed).

Electrical
. Power (all LED's on) : 8 - 30VDC @2.4W, 200 mA @ 12VDC, 100 mA @             24VDC
. Power connector : Pluggable terminal block, 2 position

Communications
. RS232 and RS422
. 4821 to 19200 baud
. Compatible with most major PLC protocols
. Microprocessor-compatible protocol
. 15 pin female 'D' shell connector

Environmental
. Enclosure - NEMA 4 (installed) recessed mount
. Temperature - 0 to 50 C
. Humidity - 95% Non-condensing

Labeling of Lamps and Pushbuttons
. User-defined slide-in labels

OptiMate Model Series: